Publikasi Prof. Dr. Apri Heri Iswanto, S.hut., M.si. | Fakultas Kehutanan Universitas Sumatera Utara

RIANA ANGGRAINI , APRI HERI ISWANTO , IKA YULIANDARI , Antalina Florida Br. Marpaung , Feby Savva Kharisma , Sarah Augustina , Widya Fatriasari , MUHAMMAD RASYIDUR RIDHO

Comparative Analysis of Fiber Characteristics and Chemical, Physical, and Mechanical Properties of Six Indigenous Bamboo Species from Indonesia

APRI HERI ISWANTO

Enhanced Adhesion and Reduced Formaldehyde Emission of Urea-Formaldehyde Resin Bonded Plywood Panel Using Intercalated Montmorillonite and Laponite Nanoclay

APRI HERI ISWANTO

The Effect of Harvesting Time on the Fiber Quality of Kenaf and Roselle

APRI HERI ISWANTO

Modified acacia lignin-reinforced epoxy nanocomposites with PVA assistance for sustainable food packaging

APRI HERI ISWANTO

Characteristics of Bioplastics Based on Chitosan and Kraft Lignin Derived from Acacia mangium

APRI HERI ISWANTO

Characteristics of Three Bamboo Species and Their Potential as Raw Materials for Oriented Strand Board Production

APRI HERI ISWANTO

Chemical constituents, physical, and mechanical properties of Indonesian sugar palm (Arenga longipes Mogea) trunk

APRI HERI ISWANTO

Fiber Quality of Peol Bamboo (Dendrocalamus giganteus Wallich ex Munro) as a Raw for Pulp and Paper

IHAK SUMARDI , RUDI HARTONO , APRI HERI ISWANTO , TRISNA PRIADI

Exploring Bonding and Interfacial Adhesion Properties of Normal and Reaction Wood in Wood-Based Composites–A Review

APRI HERI ISWANTO

Synthesis, characterization, applications, and environmental impacts of nanofluid thermosetting adhesives for sustainable bio-composites: A review

DEWI KURNIANINGSIH ARUM KUSUMAHASTUTI , APRI HERI ISWANTO , Ina Winarni , Muhammad Adly Rahandi Lubis , EFRI MARDAWATI

Enhancing the Performance of Cold-Setting Phenol–Resorcinol–Formaldehyde Resin Adhesives through Condensation Extension

APRI HERI ISWANTO

Performance of Exterior-Grade Plywood Composites Bonded With Formaldehyde-Free Bio-Adhesives Derived From Polyvinyl Alcohol, Citric Acid, and Microwave-Assisted Carboxymethylation of Lignocellulose

APRI HERI ISWANTO

Effect of Air Heat Treatment on the Shrinkage and Surface Roughness of Six Korean Oak Woods

APRI HERI ISWANTO

The economic value and marketing chain of gambir (Uncaria gambir Roxb) in Pakpak Bharat Regency, North Sumatra

TITO SUCIPTO , APRI HERI ISWANTO

A comprehensive review of lignin-reinforced lignocellulosic composites: Enhancing fire resistance and reducing formaldehyde emission

APRI HERI ISWANTO

The influence of washing of rice straw lignin isolation on polyurethane synthesis for coating in biomedical application

APRI HERI ISWANTO

Ramie Fibers from Agroforestry System as Sustainable Materials for Functional Textiles: A Review

MANGGAR ARUM ARISTRI , WAHYU HIDAYAT , Muhammad Adly Rahandi Lubis , APRI HERI ISWANTO

Ramie Fibers from Agroforestry System as Sustainable Materials for Functional Textiles: A Review

APRI HERI ISWANTO

Production and Properties Chip Block Pallets from Teak Wood (Tectona grandis sp.) Biomass

APRI HERI ISWANTO

Hydrolytic Stability of Sengon-Oriented Strand Board Bonded with Hybrid Phenol-Formaldehyde/Polymeric Methylene Diphenyl Diisocyanate Adhesives

APRI HERI ISWANTO

Overview of the Synthesis, Characterization, and Application of Tannin-Glyoxal Adhesive for Wood-Based Composites

APRI HERI ISWANTO

Adhesion and Cohesion Performance of Polyurethane Made of Bio-Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood

APRI HERI ISWANTO

Effect of Air Heat Treatment on the Color Change and Weight and Density Loss of Six Korean Oak Woods

APRI HERI ISWANTO

Thermo-Mechanical, Physico-Chemical, Morphological, and Fire Characteristics of Eco-Friendly Particleboard Manufactured with Phosphorylated Lignin Addition

HARISYAH MANURUNG , APRI HERI ISWANTO

Performance of Oriented Strand Board Made of Heat-Treated Bamboo (Dendrocalamus asper (Schult.) Backer) Strands

APRI HERI ISWANTO

Characteristics of Biopellets Manufactured from Various Lignocellulosic Feedstocks as Alternative Renewable Energy Sources

HARISYAH MANURUNG , APRI HERI ISWANTO

The effect of chemically modified wood particles on the termite durability of sandwich particleboard from Cotylelobium melanoxylon and Gigantochloa pruriens

NIKEN SUBEKTI , D Tarmadi , TEKAT DWI CAHYONO , ATMAWI DARWIS , SYAHIDAH , HIKMA YANTI , APRI HERI ISWANTO

Hot-pressing effect on the termite durability of sandwich particleboards from Styrax sumatrana and Gigantochloa pruriens

HIKMA YANTI , TEKAT DWI CAHYONO , ATMAWI DARWIS , NIKEN SUBEKTI , SYAHIDAH , APRI HERI ISWANTO , D Tarmadi

Eco-Friendly and High-Performance Bio-Polyurethane Adhesives from Vegetable Oils: A Review

APRI HERI ISWANTO , SENA MAULANA , EFRI MARDAWATI

The Application of Entomopathogenic Fungi Metarhizium anisopliae, Beauveria bassiana, and Trichoderma harzianum for Coptotermes curvignathus and Cryptotermes cynocephalus Termite Control in Indonesia

APRI HERI ISWANTO

Properties of bio-based non-isocyanate polyurethane resins derived from viscous tannin of Acacia mangium bark, dimethyl carbonate, and hexamethylenediamine

APRI HERI ISWANTO

Effects of boiling water treatment on the physical properties of Quercus variabilis virgin cork grown in Korea

APRI HERI ISWANTO

Isocyanate–free tannin–based polyurethane resins for enhancing thermo-mechanical properties of ramie (Boehmeria nivea L.) fibers

APRI HERI ISWANTO

Chemical properties, crystallinity, and fiber biometry of Jabon (Anthocephalus cadamba) wood for pulp raw material: the effect of age and position

ALFI RUMIDATUL , ATMAWI DARWIS , TATI KARLIATI , EKA MULYA ALAMSYAH , LILI MELANI , APRI HERI ISWANTO

Radial Variation of Wood Anatomical Characteristics and Maturation Ages of Six Korean Oak Species

APRI HERI ISWANTO

Preparation of superhydrophobic biomedical pulp from rice straw coated with a stearic acid-cellulose composite

APRI HERI ISWANTO

Isocyanate–free tannin–based polyurethane resins for enhancing thermo-mechanical properties of ramie (Boehmeria nivea L.) fibers

APRI HERI ISWANTO

Durability of heat-treated Paulownia tomentosa and Pinus koraiensis woods in palm oil and air against brown- and white-rot fungi

APRI HERI ISWANTO , WAHYU HIDAYAT , INTAN FAJAR SURI , Won Joung Hwang , Byantara Darsan Purusatama , Jong Ho Kim , Se Yeong Park , Seung Hwan Lee , Nam Hun Kim

Durability of heat-treated Paulownia tomentosa and Pinus koraiensis woods in palm oil and air against brown- and white-rot fungi

APRI HERI ISWANTO

Macroscopic and Microscopic Anatomical Characteristics of Six Korean Oak Species

APRI HERI ISWANTO

Biological Rotation Age of Community Teak (Tectona grandis) Plantation Based on the Volume, Biomass, and Price Growth Curve Determined through the Analysis of Its Tree Ring Digitization

APRI HERI ISWANTO , EFFENDI TRI BAHTIAR , Nam-Hun Kim

Latest Advancements in the Development of High-Performance Lignin- and Tannin-Based Non-Isocyanate Polyurethane Adhesive for Wood Composites

APRI HERI ISWANTO

The effect of chemically modified wood particles on the termite durability of sandwich particleboard from Cotylelobium melanoxylon and Gigantochloa pruriens

HIKMA YANTI , TEKAT DWI CAHYONO , APRI HERI ISWANTO , SYAHIDAH , NIKEN SUBEKTI , ATMAWI DARWIS

Hot-pressing effect on the termite durability of sandwich particleboards from Styrax sumatrana and Gigantochloa pruriens

APRI HERI ISWANTO , ATMAWI DARWIS , TEKAT DWI CAHYONO , SYAHIDAH , NIKEN SUBEKTI , HIKMA YANTI

Properties of Ramie (Boehmeria nivea (L.) Gaudich) Fibers Impregnated with Non-Isocyanate Polyurethane Resins Derived from Lignin

APRI HERI ISWANTO

Cohesion and Adhesion Performance of Tannin-Glyoxal Adhesives at Different Formulations and Hardener Types for Bonding Particleboard Made of Areca (Areca catechu) Leaf Sheath

APRI HERI ISWANTO

Annual Tree-Ring Curve-Fitting for Graphing the Growth Curve and Determining the Increment and Cutting Cycle Period of Sungkai (Peronema canescens

APRI HERI ISWANTO , EFFENDI TRI BAHTIAR

Annual Tree-Ring Curve-Fitting for Graphing the Growth Curve and Determining the Increment and Cutting Cycle Period of Sungkai (Peronema canescens)

APRI HERI ISWANTO

Effect of Lignin or Lignosulfonate Addition on the Fire Resistance of Areca (Areca catechu) Particleboards Bonded with Ultra-Low-Emitting Urea-Formaldehyde Resin

APRI HERI ISWANTO

Influence of Isocyanate Content and Hot-Pressing Temperatures on the Physical–Mechanical Properties of Particleboard Bonded with a Hybrid Urea–Formaldehyde/Isocyanate Adhesive

APRI HERI ISWANTO

Artificial Weathering Effects on the Physical and Chemical Properties of Paulownia tomentosa and Pinus koraiensis Woods Heat-Treated in Oil and Air

WAHYU HIDAYAT , INTAN FAJAR SURI , APRI HERI ISWANTO , Jong Ho Kim , Se Yeong Park , Nam Hun Kim , Seung Hwan Lee , Byantara Darsan Purusatama

Artificial Weathering Effects on the Physical and Chemical Properties of Paulownia tomentosa and Pinus koraiensis Woods Heat-Treated in Oil and Air

APRI HERI ISWANTO

Artificial Weathering Effects on the Physical and Chemical Properties of Paulownia tomentosa and Pinus koraiensis Woods Heat-Treated in Oil and Air

Nam Hun Kim , WAHYU HIDAYAT , Intan Fajar Suri , Byantara Darsan Purusatama , Jong Ho Kim , Se Yeong Park , Seung Hwan Lee , APRI HERI ISWANTO

Adhesion and Cohesion Strength of Phenol-Formaldehyde Resin Mixed with Different Types and Levels of Catalyst for Wood Composites

APRI HERI ISWANTO

Preparation and characterization of non-isocyanate polyurethane resins derived from tannin of Acacia mangium bark for the modification of ramie fibers

APRI HERI ISWANTO

Eco-friendly tanin based non isocyanate polyurethane Resins for the modification of ramie (boehmeria nivea L) fibers

APRI HERI ISWANTO

Properties of Plywood Bonded with Formaldehyde-Free Adhesive Based on Poly (vinyl alcohol)â€“Tanninâ€“Hexamine at Different Formulations and Cold-Pressing Times

APRI HERI ISWANTO

Eco-Friendly Tannin-Based Non-Isocyanate Polyurethane Resins for the Modification of Ramie (Boehmeria nivea L.) Fibers

APRI HERI ISWANTO

Influence of Isocyanate Content and Hot-Pressing Temperatures on the Physical–Mechanical Properties of Particleboard Bonded with a Hybrid Urea–Formaldehyde/Isocyanate Adhesive

JAJANG SUTIAWAN , ATMAWI DARWIS , APRI HERI ISWANTO

Characterization of lignin isolated from oil palm empty fruit bunch using phosphoric acid

APRI HERI ISWANTO

The Effect of Active Alkali and Sulfidity Loading on the Kraft Pulp Properties of Sweet Sorghum Bagasse

APRI HERI ISWANTO

Characteristics of Simalambuo (Lophopetalum sp.) wood from Nias Island, North Sumatra Province, Indonesia

APRI HERI ISWANTO

Development and Characterization of Eco-Friendly Non-Isocyanate Urethane Monomer from Jatropha curcas Oil for Wood Composite Applications

APRI HERI ISWANTO

Characterization of Formacell Lignin Derived from Black Liquor as a Potential Green Additive for Advanced Biocomposites

APRI HERI ISWANTO

Linear Expansion and Durability of a Composite Boards (MDF Laminated Using Three Selected Wood Veneers) against Drywood Termites

TEKAT DWI CAHYONO , HIKMA YANTI , APRI HERI ISWANTO

Post-modification of ultra-low molar ratio urea-formaldehyde adhesive with different types and levels of organic acid hardener

APRI HERI ISWANTO

Exploration of high-quality wood-producing trees on the Universitas Sumatera Utara (USU) Medan campus's green space

APRI HERI ISWANTO

Latest advancements in high-performance bio-based wood adhesives: A critical review

APRI HERI ISWANTO

Latest advancements in high-performance bio-based wood adhesives: A critical review

APRI HERI ISWANTO

Improvement of Thermal Behavior of Rattan by Lignosulphonate Impregnation Treatment

APRI HERI ISWANTO

Environmentally Friendly Starch-Based Adhesives for Bonding High-Performance Wood Composites: A Review

APRI HERI ISWANTO

Technological Properties of Formaldehyde Free Adhesives Based on Oxidized Starch Mixed with Different Crosslinkers for Plywood

APRI HERI ISWANTO

Chemical, Physical, and Mechanical Properties of Belangke Bamboo (Gigantochloa pruriens) and Its Application as a Reinforcing Material in Particleboard Manufacturing

APRI HERI ISWANTO

Recent developments in lignin modification and its application in lignin-based green composites: A review

APRI HERI ISWANTO

Effect of reaction time on the molecular weight distribution of polyurethane modified epoxy and its properties

APRI HERI ISWANTO

Modification of Ramie Fiber via Impregnation with Low Viscosity Bio-Polyurethane Resins Derived from Lignin

APRI HERI ISWANTO

Lignin as green filler in polymer composites: development methods, characteristics, and potential applications

APRI HERI ISWANTO

Characterization of Indonesian banana species as an alternative cellulose fibers

APRI HERI ISWANTO

Recent progress in ultra-low formaldehyde emitting adhesive systems and formaldehyde scavengers in wood-based panels: a review

APRI HERI ISWANTO

Thermal and mechanical performance of ramie fibers modified with polyurethane resins derived from acacia mangium bark tannin

APRI HERI ISWANTO

A review on Lantana camara lignocellulose fiberâ€‘reinforced polymer composites

APRI HERI ISWANTO

Performance of eco-friendly particleboard from agroindustrial residues bonded with formaldehyde-free natural rubber latex adhesive for interior applications

APRI HERI ISWANTO

Physical and Chemical Properties of Acacia mangium Lignin Isolated from Pulp Mill Byproduct for Potential Application in Wood Composites

APRI HERI ISWANTO

Recent Advances in the Development of Fire-Resistant Biocompositesâ€”A Review

APRI HERI ISWANTO

A recent advancement on preparation, characterization and application of nanolignin

APRI HERI ISWANTO

A comprehensive review on natural fibers: Technological and socio-economical aspects

APRI HERI ISWANTO

Particleboard from kemenyan wood and belangke bamboo: Effect of particle pre-treatment in acidic solution

APRI HERI ISWANTO

Enhancing thermal and mechanical properties of ramie fiber via impregnation by lignin-based polyurethane resin

APRI HERI ISWANTO

Optimization of maleic acid pretreatment of oil palm empty fruit bunches (OPEFB) using response surface methodology to produce reducing sugars

APRI HERI ISWANTO

Bio-based polyurethane resins derived from tannin: Source, synthesis, characterisation, and application

APRI HERI ISWANTO

Design and Performance of Amphiphilic Lignin Derivatives in Enzymatic Hydrolysis of Sweet Sorghum Bagasse for Bioethanol Production

APRI HERI ISWANTO

Recent developments in lignin- and tannin-based non-isocyanate polyurethane resins for wood adhesivesÃƒÂ¢Ã‚â‚¬Ã‚â€�a review

APRI HERI ISWANTO

Maintaining tree biodiversity in urban communities on the university campus

APRI HERI ISWANTO

The resistance of styrax sumatrana wood of varying growth sites and stem axial positions to subterranean termite (Coptotermes curvignathus) attack

APRI HERI ISWANTO

Enhancing the performance of natural rubber latex with polymeric isocyanate as cold-pressing and formaldehyde free adhesive for plywood

APRI HERI ISWANTO

Wood chemical compositions of raru species originating from central tapanuli, north sumatra, indonesia: Effect of differences in wood species and log positions1

APRI HERI ISWANTO

Variation of quantitative anatomical characteristics in the culm of Belangke Bamboo (Gigantochloa pruriens)

APRI HERI ISWANTO

Short communication: The higher laccase enzyme producer, cerrena sp. bmd.ta.1, isolated from gunung rinjani national park, West Nusa Tenggara, Indonesia

APRI HERI ISWANTO

Optimizing the synthesis of lignin derivatives from acacia mangium to improve the enzymatic hydrolysis of kraft pulp sorghum bagasse

APRI HERI ISWANTO

Dimensional stability, color change, and durability of boron-MMA treated red jabon (Antochephalus macrophyllus) wood

TEKAT DWI CAHYONO , TRISNA PRIADI , APRI HERI ISWANTO

Linear expansion and durability of a composite boards (Mdf laminated using three selected wood veneers) against drywood termites

APRI HERI ISWANTO

Enzymatic hydrolysis performance of biomass by the addition of a lignin based biosurfactant

APRI HERI ISWANTO

The physical, mechanical, and sound absorption properties of sandwich particleboard (SPb)

APRI HERI ISWANTO

Dimensional stability, color change, and durability of boron-mma treated red jabon (Antochephalus macrophyllus) wood1

APRI HERI ISWANTO

Quality comparison of activated carbon produced from oil palm fronds by chemical activation using sodium carbonate versus sodium chloride

APRI HERI ISWANTO

Flexural properties of heat-treatment samama (Anthocephalus macrophyllus) wood impregnated by boron and methyl metacrylate

APRI HERI ISWANTO

The flexural properties of medium density fibreboard overlaid with veneer from three species of wood

APRI HERI ISWANTO , HIKMA YANTI , TEKAT DWI CAHYONO

The durability of OSB composite plywood with avocado, mahogany, and pine wood veneers against drywood and subterranean termites

APRI HERI ISWANTO , HIKMA YANTI , MUHAMMAD RIAD ULUPUTTY , TEKAT DWI CAHYONO

Effect of several exterior adhesive types on dimensional stability of bamboo oriented particleboard

APRI HERI ISWANTO

Fundamental properties of composite board made with oriented strand board and three different species of veneer

HIKMA YANTI , TEKAT DWI CAHYONO , APRI HERI ISWANTO

Antioxidant and antifungal activity of endophytic fungi associated with Agarwood trees

APRI HERI ISWANTO

Fundamental properties of composite board made with oriented strand board and three different species of veneer

APRI HERI ISWANTO

Variation in chemical constituent of Styrax sumatrana wood growing at different cultivation site in North Sumatra, Indonesia

APRI HERI ISWANTO

Morphological characteristics of Bambusa vulgaris and the distribution and shape of vascular bundles therein

APRI HERI ISWANTO , ATMAWI DARWIS

Morphological characteristics of bambusa vulgaris and the distribution and shape of vascular bundles therein1

APRI HERI ISWANTO

Radical scavenging activity of kemenyan resin produced by an indonesian native plant, styrax sumatrana1

APRI HERI ISWANTO

Effect of particle pre-treatment on properties of jatropha fruit hulls particleboard

APRI HERI ISWANTO

The physical, mechanical and durability properties of sorghum bagasse particleboard by layering surface treatment

APRI HERI ISWANTO

Physical and mechanical properties of three-layer particleboards bonded with UF and UMF adhesives

APRI HERI ISWANTO

Morphological and anatomical evaluation of grafted Pinus Merkusii

APRI HERI ISWANTO

Physical and mechanical properties of local styrax woods from north tapanuli in Indonesia

APRI HERI ISWANTO

Physical and mechanical properties of local styrax woods from north tapanuli in Indonesia

APRI HERI ISWANTO , ARIDA SUSILOWATI

The kraft pulp and paper properties of sweet sorghum bagasse (Sorghum bicolor L Moench)

APRI HERI ISWANTO